The typical straw gasification power generation process is mainly composed of six parts: feed device, gas generation system, gas purification system, gas power generation system, control system and wastewater treatment system.

（1）進料裝置；進料裝置一般采用螺旋進料器，依靠電磁調速電機驅動并調節秸稈物料的進料量，螺旋進料器不僅能夠保證連續均勻地進料，而且能夠有效地將氣化爐與外部隔絕密閉起來，使氣化所需空氣只能由鼓風機控制進入氣化爐。

(1) Feeding device; The feeding device generally adopts a screw feeder, which is driven by an electromagnetic speed-regulating motor and regulates the feeding amount of straw materials. The screw feeder can not only ensure continuous and uniform feeding, but also effectively isolate and seal the gasifier from the outside, so that the air required for gasification can only be controlled by the blower to enter the gasifier.

（2）燃氣發生系統；燃氣發生系統主要由進風機、氣化爐和排渣螺旋裝置構成。氣化爐有固定床氣化爐、流化床氣化爐等不同形式，但主要采用循環流化床氣化爐。農作物秸稈在氣化爐中轉化為可燃氣體，氣化后產生的灰分由排渣螺旋裝置及時排出爐外。

(2) Gas generation system; The gas generation system is mainly composed of inlet fan, gasifier and slag removal screw device. The gasifier has different forms, such as fixed bed gasifier and fluidized bed gasifier, but mainly uses circulating fluidized bed gasifier. Crop straw is converted into combustible gas in the gasifier, and the ash generated after gasification is timely discharged from the furnace by the slag removal screw device.

（3）燃氣凈化系統；秸稈氣化后產生的可燃氣含有大量的粉塵、灰分、焦油等，需經過凈化處理后才能用于發電。對于固體顆粒和細粉塵的去除一般選用多級除塵技術，如慣性除塵器、旋風除塵器、文丘里洗滌器、電除塵器等。可燃氣中焦油的去除一般采用吸附和水洗的方法，主要設備是兩個串聯的噴淋洗氣塔。

(3) Gas purification system; The combustible gas produced after straw gasification contains a large amount of dust, ash, tar, etc., which can be used for power generation only after purification. For the removal of solid particles and fine dust, multi-stage dust removal technology is generally adopted, such as inertial dust collector, cyclone dust collector, venturi scrubber, electric dust collector, etc. Tar in combustible gas is generally removed by adsorption and water washing, and the main equipment is two spray gas washing towers in series.

（4）燃氣發電系統；燃氣發電系統主要有內燃機發電系統、燃氣輪機發電系統和燃氣內燃機組發電系統三種。內燃機發電系統以簡單的內燃機組為主，可以單獨燃用低熱值燃氣，也可以燃氣、油兩用，其設備技術成熟可靠，乃常用設備。燃氣輪機發電系統對燃氣的質量要求較高，而且需要較高的自動化控制水平和燃氣輪機改造技術水平，所以單用燃氣輪機的秸稈發電技術較少。燃氣-蒸汽聯用混合發電技術是在內燃機、燃氣輪機發電的基礎上增加余熱蒸汽的聯合循環，可以有效提高效率，燃氣-蒸汽聯合循環的秸稈發電系統一般采用燃氣輪機發電設備。

(4) Gas power generation system; Gas power generation system mainly includes internal combustion engine power generation system, gas turbine power generation system and gas internal combustion unit power generation system. The internal combustion engine power generation system is mainly composed of simple internal combustion units, which can be used to burn low calorific value gas alone or both gas and oil. Its equipment technology is mature and reliable, and it is a common equipment. Gas turbine power generation system requires high quality of gas, and requires high automation control level and gas turbine transformation technology level, so straw power generation technology of gas turbine alone is less. Gas-steam combined hybrid power generation technology is a combined cycle that adds waste heat steam on the basis of internal combustion engine and gas turbine power generation, which can effectively improve efficiency. The straw power generation system of gas-steam combined cycle generally uses gas turbine power generation equipment.

（5）控制系統；控制系統主要由電控柜、熱電偶、溫度顯示儀、壓力表以及風量控制閥構成，有需要時還可以增加電腦自動化監控系統。

(5) Control system; The control system is mainly composed of electric control cabinet, thermocouple, temperature indicator, pressure gauge and air volume control valve. If necessary, computer automatic monitoring system can also be added.

（6）廢水處理系統；秸稈氣化發電產生的廢水一般采用過濾吸附、生物法處理或者化學混凝法等處理，然后循環利用。

(6) Wastewater treatment system; The wastewater from straw gasification and power generation is generally treated by filtration adsorption, biological treatment or chemical coagulation, and then recycled.